2013 Volkswagen JETTA Oil Capacity, Types, & Filters
Your ultimate DIY maintenance guide for the 2013 Volkswagen JETTA oil change is here! No more searching – find all the critical oil specs for your 2013 Volkswagen JETTA, including exact engine oil capacity, the manufacturer recommended oil viscosity and type, and the correct OEM and aftermarket oil filters.
We cover all available engine options categorized by their specific engine codes, ensuring you get pinpoint accuracy for your specific vehicle configuration. Keep reading to discover everything required for a successful 2013 Volkswagen JETTA oil change!
Scroll Table ➜
Recommended Oil Filter
Recommended Air Filter
As an Amazon Associate I earn from qualifying purchases.
Select Your 2013 Volkswagen JETTA Engine Option
1.4L 4-cylinder Engine Code CBTA
Engine:
1.4L 4-cylinder CBTA [aka 1.4L L4 (Electric/Gas)]
Body & Trims:
S, SE, SEL
Oil Capacity:
4.2 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
07K-115-397-A, 07K-115-397-B
2013 Volkswagen JETTA 1.4L 4-cylinder CBTA oil change details
Oil Capacity:
4.2 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.0L 4-cylinder Engine Code CBUA
Engine:
2.0L 4-cylinder CBUA [aka 2.0L L4 (Diesel)]
Body & Trims:
S, SE, SEL
Oil Capacity:
4.9 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
07K-115-397-A, 07K-115-397-B
2013 Volkswagen JETTA 2.0L 4-cylinder CBUA oil change details
Oil Capacity:
4.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Air Filter:
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.0L 4-cylinder Engine Code CBFA Turbo
Engine:
2.0L 4-cylinder CBFA Turbo [aka 2.0L L4 (Diesel)]
Body & Trims:
GLI, TDI, TDI Premium
Oil Capacity:
3.9 quarts (with filter)
OEM Oil Filter:
Volkswagen 06J-115-403-Q, Volkswagen 071-115-562-A, Volkswagen 06A-115-561-B and Volkswagen 06L-115-562-B
Oil Filter Replaces:
06J-115-403-C, 06J-115-403-J, 06J-115-403-M, 071-115-562, 071-115-562-C, 034-115-561-A, 06A-115-561 and 06K-115-466, 06K-115-562, 06L-115-562, 06L-115-562-E
2013 Volkswagen JETTA 2.0L 4-cylinder CBFA Turbo oil change details
Oil Capacity:
3.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Coolant Capacity:
5.3 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.0L 4-cylinder Engine Code CBPA
Engine:
2.0L 4-cylinder CBPA [aka 2.0L L4 (Diesel)]
Body & Trims:
GLI, TDI, TDI Premium
Oil Capacity:
4.9 quarts (with filter)
OEM Oil Filter:
Volkswagen 06J-115-403-Q, Volkswagen 071-115-562-A, Volkswagen 06A-115-561-B and Volkswagen 06L-115-562-B
Oil Filter Replaces:
06J-115-403-C, 06J-115-403-J, 06J-115-403-M, 071-115-562, 071-115-562-C, 034-115-561-A, 06A-115-561 and 06K-115-466, 06K-115-562, 06L-115-562, 06L-115-562-E
2013 Volkswagen JETTA 2.0L 4-cylinder CBPA oil change details
Oil Capacity:
4.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Air Filter:
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.0L 4-cylinder Engine Code CCTA Turbo
Engine:
2.0L 4-cylinder CCTA Turbo [aka 2.0L L4 (Diesel)]
Body & Trims:
GLI, TDI, TDI Premium
Oil Capacity:
4.5 quarts (with filter)
Oil Viscosity/Type:
SAE 5W-30 (All TEMPS)
OEM Oil Filter:
Volkswagen 06J-115-403-Q, Volkswagen 071-115-562-A, Volkswagen 06A-115-561-B and Volkswagen 06L-115-562-B
Oil Filter Replaces:
06J-115-403-C, 06J-115-403-J, 06J-115-403-M, 071-115-562, 071-115-562-C, 034-115-561-A, 06A-115-561 and 06K-115-466, 06K-115-562, 06L-115-562, 06L-115-562-E
2013 Volkswagen JETTA 2.0L 4-cylinder CCTA Turbo oil change details
Oil Capacity:
4.5 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Oil Viscosity/Type:
SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Air Filter:
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug). After each time you remove the drain plug, you must replace it with a new one.
2.0L 4-cylinder Engine Code CJAA Diesel Turbo
Engine:
2.0L 4-cylinder CJAA Diesel Turbo [aka 2.0L L4 (Diesel)]
Body & Trims:
GLI, TDI, TDI Premium
Oil Capacity:
5.8 quarts (with filter)
OEM Oil Filter:
Volkswagen 06J-115-403-Q, Volkswagen 071-115-562-A, Volkswagen 06A-115-561-B and Volkswagen 06L-115-562-B
Oil Filter Replaces:
06J-115-403-C, 06J-115-403-J, 06J-115-403-M, 071-115-562, 071-115-562-C, 034-115-561-A, 06A-115-561 and 06K-115-466, 06K-115-562, 06L-115-562, 06L-115-562-E
2013 Volkswagen JETTA 2.0L 4-cylinder CJAA Diesel Turbo oil change details
Oil Capacity:
5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Air Filter:
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.0L 4-cylinder Engine Code CPLA Turbo
Engine:
2.0L 4-cylinder CPLA Turbo [aka 2.0L L4 (Diesel)]
Body & Trims:
GLI, TDI, TDI Premium
Oil Capacity:
5.8 quarts (with filter)
OEM Oil Filter:
Volkswagen 06J-115-403-Q, Volkswagen 071-115-562-A, Volkswagen 06A-115-561-B and Volkswagen 06L-115-562-B
Oil Filter Replaces:
06J-115-403-C, 06J-115-403-J, 06J-115-403-M, 071-115-562, 071-115-562-C, 034-115-561-A, 06A-115-561 and 06K-115-466, 06K-115-562, 06L-115-562, 06L-115-562-E
2013 Volkswagen JETTA 2.0L 4-cylinder CPLA Turbo oil change details
Oil Capacity:
5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Coolant Capacity:
5.3 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug). Always replace the drain plug seal with a new one.
2.0L 4-cylinder Engine Code CPPA Turbo
Engine:
2.0L 4-cylinder CPPA Turbo [aka 2.0L L4 (Gas)]
Body & Trims:
GLI, TDI, TDI Premium
Oil Capacity:
4.9 quarts (with filter)
OEM Oil Filter:
Volkswagen 06J-115-403-Q, Volkswagen 071-115-562-A, Volkswagen 06A-115-561-B and Volkswagen 06L-115-562-B
Oil Filter Replaces:
06J-115-403-C, 06J-115-403-J, 06J-115-403-M, 071-115-562, 071-115-562-C, 034-115-561-A, 06A-115-561 and 06K-115-466, 06K-115-562, 06L-115-562, 06L-115-562-E
2013 Volkswagen JETTA 2.0L 4-cylinder CPPA Turbo oil change details
Oil Capacity:
4.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Air Filter:
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.0L 4-cylinder Engine Code CBFA Turbo
Engine:
2.0L 4-cylinder CBFA Turbo [aka 2.0L L4 (Gas)]
Body & Trims:
GLI, TDI, TDI Premium
Oil Capacity:
3.9 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
06J-115-403-C, 06J-115-403-J, 06J-115-403-M and 071-115-562, 071-115-562-C
2013 Volkswagen JETTA 2.0L 4-cylinder CBFA Turbo oil change details
Oil Capacity:
3.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Coolant Capacity:
5.3 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.0L 4-cylinder Engine Code CBPA
Engine:
2.0L 4-cylinder CBPA [aka 2.0L L4 (Gas)]
Body & Trims:
GLI, TDI, TDI Premium
Oil Capacity:
4.9 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
06J-115-403-C, 06J-115-403-J, 06J-115-403-M and 071-115-562, 071-115-562-C
2013 Volkswagen JETTA 2.0L 4-cylinder CBPA oil change details
Oil Capacity:
4.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Air Filter:
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.0L 4-cylinder Engine Code CCTA Turbo
Engine:
2.0L 4-cylinder CCTA Turbo [aka 2.0L L4 (Gas)]
Body & Trims:
GLI, TDI, TDI Premium
Oil Capacity:
4.5 quarts (with filter)
Oil Viscosity/Type:
SAE 5W-30 (All TEMPS)
OEM Oil Filter:
Oil Filter Replaces:
06J-115-403-C, 06J-115-403-J, 06J-115-403-M and 071-115-562, 071-115-562-C
2013 Volkswagen JETTA 2.0L 4-cylinder CCTA Turbo oil change details
Oil Capacity:
4.5 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Oil Viscosity/Type:
SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Air Filter:
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug). After each time you remove the drain plug, you must replace it with a new one.
2.0L 4-cylinder Engine Code CJAA Diesel Turbo
Engine:
2.0L 4-cylinder CJAA Diesel Turbo [aka 2.0L L4 (Gas)]
Body & Trims:
GLI, TDI, TDI Premium
Oil Capacity:
5.8 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
06J-115-403-C, 06J-115-403-J, 06J-115-403-M and 071-115-562, 071-115-562-C
2013 Volkswagen JETTA 2.0L 4-cylinder CJAA Diesel Turbo oil change details
Oil Capacity:
5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Air Filter:
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.0L 4-cylinder Engine Code CPLA Turbo
Engine:
2.0L 4-cylinder CPLA Turbo [aka 2.0L L4 (Gas)]
Body & Trims:
GLI, TDI, TDI Premium
Oil Capacity:
5.8 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
06J-115-403-C, 06J-115-403-J, 06J-115-403-M and 071-115-562, 071-115-562-C
2013 Volkswagen JETTA 2.0L 4-cylinder CPLA Turbo oil change details
Oil Capacity:
5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Coolant Capacity:
5.3 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug). Always replace the drain plug seal with a new one.
2.5L 5-cylinder Engine Code CPPA Turbo
Engine:
2.5L 5-cylinder CPPA Turbo [aka 2.5L L5 (Gas)]
Body & Trims:
GLI, TDI, TDI Premium
Oil Capacity:
6.3 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
06J-115-403-C, 06J-115-403-J, 06J-115-403-M and 071-115-562, 071-115-562-C
2013 Volkswagen JETTA 2.5L 5-cylinder CPPA Turbo oil change details
Oil Capacity:
6.3 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Coolant Capacity:
9.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.5L 5-cylinder Engine Code CNLA Turbo
Engine:
2.5L 5-cylinder CNLA Turbo [aka 2.5L L5 (Gas)]
Body & Trims:
Hybrid, Hybrid SE, Hybrid SEL
Oil Capacity:
6.3 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
04E-115-561-B, 04E-115-561-H
2013 Volkswagen JETTA 2.5L 5-cylinder CNLA Turbo oil change details
Oil Capacity:
6.3 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Coolant Capacity:
9.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
People also ask – 2013 Volkswagen JETTA
What is the oil capacity of a 2013 Volkswagen JETTA?
Depending on the specific engine option, the 2013 Volkswagen JETTA oil capacity ranges from 3.9 to 6.3 quarts. Here is the exact oil capacity breakdown for each available engine configuration:
• 1.4L 4-cylinder (CBTA): 4.2 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
• 2.0L 4-cylinder (CBUA): 4.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.0L 4-cylinder (CBFA Turbo): 3.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.0L 4-cylinder (CBPA): 4.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.0L 4-cylinder (CCTA Turbo): 4.5 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
• 2.0L 4-cylinder (CJAA Diesel Turbo): 5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.0L 4-cylinder (CPLA Turbo): 5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.0L 4-cylinder (CPPA Turbo): 4.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.5L 5-cylinder (CPPA Turbo): 6.3 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.5L 5-cylinder (CNLA Turbo): 6.3 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Always check your dipstick after refilling to ensure the proper level.
What type of oil does a 2013 Volkswagen JETTA use?
Across its 15 available engine configurations, the 2013 Volkswagen JETTA uses the following motor oil viscosities: SAE 5W-40, SAE 5W-30 (All TEMPS) and SAE 5W-30 (All TEMPS). Using the correct manufacturer-approved oil weight is crucial for engine health. Here are the specific oil type requirements by engine:
• 1.4L 4-cylinder (CBTA):SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.0L 4-cylinder (CBUA):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.0L 4-cylinder (CBFA Turbo):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.0L 4-cylinder (CBPA):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.0L 4-cylinder (CCTA Turbo):
SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.0L 4-cylinder (CJAA Diesel Turbo):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.0L 4-cylinder (CPLA Turbo):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.0L 4-cylinder (CPPA Turbo):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.5L 5-cylinder (CPPA Turbo):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.5L 5-cylinder (CNLA Turbo):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
What is the best oil filter for the 2013 Volkswagen JETTA?
The proper oil filter depends on your exact engine code. Here is the specific OEM and aftermarket filter data for each engine:
• 1.4L 4-cylinder (CBTA):OEM Filter: Volkswagen 07K-115-397-D or Volkswagen 06D-115-562
Wix Filter: Check Cross-reference Catalog
• 2.0L 4-cylinder (CBUA):
OEM Filter: Volkswagen 07K-115-397-D or Volkswagen 06D-115-562
Wix Filter: Check Cross-reference Catalog
• 2.0L 4-cylinder (CBFA Turbo):
OEM Filter: Volkswagen 06J-115-403-Q, Volkswagen 071-115-562-A, Volkswagen 06A-115-561-B or Volkswagen 06L-115-562-B
Wix Filter: Check Cross-reference Catalog
• 2.0L 4-cylinder (CBPA):
OEM Filter: Volkswagen 06J-115-403-Q, Volkswagen 071-115-562-A, Volkswagen 06A-115-561-B or Volkswagen 06L-115-562-B
Wix Filter: Check Cross-reference Catalog
• 2.0L 4-cylinder (CCTA Turbo):
OEM Filter: Volkswagen 06J-115-403-Q, Volkswagen 071-115-562-A, Volkswagen 06A-115-561-B or Volkswagen 06L-115-562-B
Wix Filter: Check Cross-reference Catalog
• 2.0L 4-cylinder (CJAA Diesel Turbo):
OEM Filter: Volkswagen 06J-115-403-Q, Volkswagen 071-115-562-A, Volkswagen 06A-115-561-B or Volkswagen 06L-115-562-B
Wix Filter: Check Cross-reference Catalog
• 2.0L 4-cylinder (CPLA Turbo):
OEM Filter: Volkswagen 06J-115-403-Q, Volkswagen 071-115-562-A, Volkswagen 06A-115-561-B or Volkswagen 06L-115-562-B
Wix Filter: Check Cross-reference Catalog
• 2.0L 4-cylinder (CPPA Turbo):
OEM Filter: Volkswagen 06J-115-403-Q, Volkswagen 071-115-562-A, Volkswagen 06A-115-561-B or Volkswagen 06L-115-562-B
Wix Filter: Check Cross-reference Catalog
• 2.0L 4-cylinder (CBFA Turbo):
OEM Filter: Volkswagen 06J-115-403-Q or Volkswagen 071-115-562-A
Wix Filter: Check Cross-reference Catalog
• 2.0L 4-cylinder (CBPA):
OEM Filter: Volkswagen 06J-115-403-Q or Volkswagen 071-115-562-A
Wix Filter: Check Cross-reference Catalog
• 2.0L 4-cylinder (CCTA Turbo):
OEM Filter: Volkswagen 06J-115-403-Q or Volkswagen 071-115-562-A
Wix Filter: Check Cross-reference Catalog
• 2.0L 4-cylinder (CJAA Diesel Turbo):
OEM Filter: Volkswagen 06J-115-403-Q or Volkswagen 071-115-562-A
Wix Filter: Check Cross-reference Catalog
• 2.0L 4-cylinder (CPLA Turbo):
OEM Filter: Volkswagen 06J-115-403-Q or Volkswagen 071-115-562-A
Wix Filter: Check Cross-reference Catalog
• 2.5L 5-cylinder (CPPA Turbo):
OEM Filter: Volkswagen 06J-115-403-Q or Volkswagen 071-115-562-A
Wix Filter: Check Cross-reference Catalog
• 2.5L 5-cylinder (CNLA Turbo):
OEM Filter: Volkswagen 04E-115-561-T
Wix Filter: Check Cross-reference Catalog
How often should I change the oil in my 2013 Volkswagen JETTA?
For modern models running full synthetic oil, oil change intervals are typically every 7,500 to 10,000 miles. However, for older Volkswagen JETTA generations (1985-2010) or those using conventional/synthetic-blend fluid, changing the oil and filter every 3,000 to 5,000 miles is highly recommended to prevent sludge buildup. Regardless of engine (1.4L 4-cylinder, 2.0L 4-cylinder and 2.5L 5-cylinder), you should change your oil at least once a year even if you don’t reach the mileage limit.