2008 BMW Z4 Oil Capacity, Types, & Filters
Your ultimate DIY maintenance guide for the 2008 BMW Z4 oil change is here! No more searching – find all the critical oil specs for your 2008 BMW Z4, including exact engine oil capacity, the manufacturer recommended oil viscosity and type, and the correct OEM and aftermarket oil filters.
We cover all available engine options categorized by their specific engine codes, ensuring you get pinpoint accuracy for your specific vehicle configuration. Keep reading to discover everything required for a successful 2008 BMW Z4 oil change!
Scroll Table ➜
| Engine & Code | Oil Capacity | Oil Viscosity/Type | Oil Filter |
|---|---|---|---|
| 3.0L 6-cylinder S54 B32 M | 6.9 quarts (with filter) | SAE 0W-30 (All TEMPS) | BMW 11-42-7-833-769 |
| 3.2L 6-cylinder N52 B30 E | 5.8 quarts (with filter) | SAE 10W-60 (All TEMPS) | BMW 11-42-7-953-129 |
Select Your 2008 BMW Z4 Engine Option
3.0L 6-cylinder Engine Code S54 B32 M
Engine:
3.0L 6-cylinder S54 B32 M [aka 3.0L L6 (Gas)]
Body & Trims:
M COUPE, M Roadster
Oil Capacity:
6.9 quarts (with filter)
Oil Viscosity/Type:
SAE 0W-30 (All TEMPS)
OEM Oil Filter:
Oil Filter Replaces:
N/A
2008 BMW Z4 3.0L 6-cylinder S54 B32 M oil change details
Oil Grade:
SEO75
Oil Capacity:
6.9 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Oil Viscosity/Type:
SAE 0W-30 (All TEMPS)
Name of Oil Filter:
N/A
Wix Oil Filter:
N/A
Wix Air Filter:
N/A
Coolant Capacity:
8 quarts - For models with a Manual Transmission (MT).
8.9 quarts - For models with an Automatic Transmission (AT).
Oil Drain Plug Torque:
M22x1.5 - 45 ft/lbs (Oil Drain Plug).
M18x1.5 - 26 ft/lbs (Oil Drain Plug).
M12x1.5 - 19 ft/lbs (Oil Drain Plug)
Notes:
N/A
3.2L 6-cylinder Engine Code N52 B30 E
Engine:
3.2L 6-cylinder N52 B30 E [aka 3.2L L6 (Gas)]
Body & Trims:
COUPE 3.0si, Roadster 3.0i, Roadster 3.0si
Oil Capacity:
5.8 quarts (with filter)
Oil Viscosity/Type:
SAE 10W-60 (All TEMPS)
OEM Oil Filter:
Oil Filter Replaces:
11-42-7-541-827, 11-42-7-566-327, 11-42-8-683-196
2008 BMW Z4 3.2L 6-cylinder N52 B30 E oil change details
Oil Grade:
SEO63
Oil Capacity:
5.8 quarts. (with filter). This is the capacity with the filter. To check the oil level, the engine must be at full operating temperature. Let the engine idle for at least 15 seconds, then turn it off. Wait at least 1 minute for the oil to drain into the sump before checking the level with the dipstick.
Oil Viscosity/Type:
SAE 10W-60 (All TEMPS)
Name of Oil Filter:
N/A
Wix Oil Filter:
N/A
Wix Air Filter:
N/A
Coolant Capacity:
11.3 quarts
Oil Drain Plug Torque:
M22x1.5 - 45 ft/lbs (Oil Drain Plug).
M18x1.5 - 26 ft/lbs (Oil Drain Plug).
M12x1.5 - 19 ft/lbs (Oil Drain Plug)
Notes:
N/A
People also ask – 2008 BMW Z4
What is the oil capacity of a 2008 BMW Z4?
Depending on the specific engine option, the 2008 BMW Z4 oil capacity ranges from 5.8 to 6.9 quarts. Here is the exact oil capacity breakdown for each available engine configuration:
• 3.0L 6-cylinder (S54 B32 M): 6.9 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
• 3.2L 6-cylinder (N52 B30 E): 5.8 quarts. (with filter). This is the capacity with the filter. To check the oil level, the engine must be at full operating temperature. Let the engine idle for at least 15 seconds, then turn it off. Wait at least 1 minute for the oil to drain into the sump before checking the level with the dipstick.
Always check your dipstick after refilling to ensure the proper level.
What type of oil does a 2008 BMW Z4 use?
Across its 2 available engine configurations, the 2008 BMW Z4 uses the following motor oil viscosities: SAE 0W-30 (All TEMPS) and SAE 10W-60 (All TEMPS). Using the correct manufacturer-approved oil weight is crucial for engine health. Here are the specific oil type requirements by engine:
• 3.0L 6-cylinder (S54 B32 M):Grade: SEO75
SAE 0W-30 (All TEMPS)
• 3.2L 6-cylinder (N52 B30 E):
Grade: SEO63
SAE 10W-60 (All TEMPS)
What is the best oil filter for the 2008 BMW Z4?
The proper oil filter depends on your exact engine code. The 2008 BMW Z4 utilizes the following premium aftermarket Wix oil filters across its lineup: . Here is the specific OEM and aftermarket filter data for each engine:
• 3.0L 6-cylinder (S54 B32 M):OEM Filter: BMW 11-42-7-833-769
Wix Filter: Check Cross-reference Catalog
• 3.2L 6-cylinder (N52 B30 E):
OEM Filter: BMW 11-42-7-953-129
Wix Filter: Check Cross-reference Catalog
How often should I change the oil in my 2008 BMW Z4?
For modern models running full synthetic oil, oil change intervals are typically every 7,500 to 10,000 miles. However, for older BMW Z4 generations (1985-2010) or those using conventional/synthetic-blend fluid, changing the oil and filter every 3,000 to 5,000 miles is highly recommended to prevent sludge buildup. Regardless of engine (3.0L 6-cylinder and 3.2L 6-cylinder), you should change your oil at least once a year even if you don’t reach the mileage limit.