2014 Volkswagen Beetle Oil Capacity, Types, & Filters
Your ultimate DIY maintenance guide for the 2014 Volkswagen Beetle oil change is here! No more searching – find all the critical oil specs for your 2014 Volkswagen Beetle, including exact engine oil capacity, the manufacturer recommended oil viscosity and type, and the correct OEM and aftermarket oil filters.
We cover all available engine options categorized by their specific engine codes, ensuring you get pinpoint accuracy for your specific vehicle configuration. Keep reading to discover everything required for a successful 2014 Volkswagen Beetle oil change!
Scroll Table ➜
| Engine & Code | Oil Capacity | Oil Viscosity/Type | Oil Filter |
|---|---|---|---|
| 1.8L 4-cylinder CJAA Diesel Turbo | 5.8 quarts (with filter) | SAE 5W-40, SAE 5W-30 (All TEMPS) | Volkswagen 06L-115-562-B Volkswagen 06J-115-403-Q |
| 1.8L 4-cylinder CPLA Turbo | 5.8 quarts (with filter) | SAE 5W-40, SAE 5W-30 (All TEMPS) | Volkswagen 06L-115-562-B Volkswagen 06J-115-403-Q |
| 2.0L 4-cylinder CPPA Turbo | 4.5 quarts (with filter) | SAE 5W-30 (All TEMPS) | Volkswagen 06L-115-562-B Volkswagen 06J-115-403-Q |
| 2.0L 4-cylinder CBTA | 5.8 quarts (with filter) | SAE 5W-40, SAE 5W-30 (All TEMPS) | Volkswagen 06D-115-562 |
| 2.0L 4-cylinder CBUA | 5.8 quarts (with filter) | SAE 5W-40, SAE 5W-30 (All TEMPS) | Volkswagen 06D-115-562 |
| 2.0L 4-cylinder CPKA Turbo | 4.5 quarts (with filter) | SAE 5W-30 (All TEMPS) | Volkswagen 06L-115-562-B |
| 2.0L 4-cylinder CPRA Turbo | 5.8 quarts (with filter) | SAE 5W-40, SAE 5W-30 (All TEMPS) | Volkswagen 06L-115-562-B |
| 2.0L 4-cylinder CJAA Diesel Turbo | 5.8 quarts (with filter) | SAE 5W-40, SAE 5W-30 (All TEMPS) | Volkswagen 071-115-562-A |
| 2.5L 5-cylinder CPLA Turbo | 6.3 quarts (with filter) | SAE 5W-40, SAE 5W-30 (All TEMPS) | Volkswagen 071-115-562-A |
| 2.5L 5-cylinder CPPA Turbo | 6.3 quarts (with filter) | SAE 5W-40, SAE 5W-30 (All TEMPS) | Volkswagen 071-115-562-A |
Recommended Oil Filter
Recommended Air Filter
As an Amazon Associate I earn from qualifying purchases.
Select Your 2014 Volkswagen Beetle Engine Option
1.8L 4-cylinder Engine Code CJAA Diesel Turbo
Engine:
1.8L 4-cylinder CJAA Diesel Turbo [aka 1.8L L4 (Gas)]
Body & Trims:
Base, GSR, R-Line
Oil Capacity:
5.8 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
06K-115-466, 06K-115-562, 06L-115-562, 06L-115-562-E and 06J-115-403-C, 06J-115-403-J, 06J-115-403-M
2014 Volkswagen Beetle 1.8L 4-cylinder CJAA Diesel Turbo oil change details
Oil Capacity:
5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Oil Filter:
Wix Air Filter:
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
1.8L 4-cylinder Engine Code CPLA Turbo
Engine:
1.8L 4-cylinder CPLA Turbo [aka 1.8L L4 (Gas)]
Body & Trims:
Base, GSR, R-Line
Oil Capacity:
5.8 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
06K-115-466, 06K-115-562, 06L-115-562, 06L-115-562-E and 06J-115-403-C, 06J-115-403-J, 06J-115-403-M
2014 Volkswagen Beetle 1.8L 4-cylinder CPLA Turbo oil change details
Oil Capacity:
5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Oil Filter:
Wix Air Filter:
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.0L 4-cylinder Engine Code CPPA Turbo
Engine:
2.0L 4-cylinder CPPA Turbo [aka 2.0L L4 (Diesel)]
Body & Trims:
Base, GSR, R-Line
Oil Capacity:
4.5 quarts (with filter)
Oil Viscosity/Type:
SAE 5W-30 (All TEMPS)
OEM Oil Filter:
Oil Filter Replaces:
06K-115-466, 06K-115-562, 06L-115-562, 06L-115-562-E and 06J-115-403-C, 06J-115-403-J, 06J-115-403-M
2014 Volkswagen Beetle 2.0L 4-cylinder CPPA Turbo oil change details
Oil Capacity:
4.5 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Air Filter:
Coolant Capacity:
5.9 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.0L 4-cylinder Engine Code CBTA
Engine:
2.0L 4-cylinder CBTA [aka 2.0L L4 (Diesel)]
Body & Trims:
Base
Oil Capacity:
5.8 quarts (with filter)
OEM Oil Filter:
2014 Volkswagen Beetle 2.0L 4-cylinder CBTA oil change details
Oil Capacity:
5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Oil Filter:
Wix Air Filter:
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.0L 4-cylinder Engine Code CBUA
Engine:
2.0L 4-cylinder CBUA [aka 2.0L L4 (Diesel)]
Body & Trims:
Base
Oil Capacity:
5.8 quarts (with filter)
OEM Oil Filter:
2014 Volkswagen Beetle 2.0L 4-cylinder CBUA oil change details
Oil Capacity:
5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Oil Filter:
Wix Air Filter:
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.0L 4-cylinder Engine Code CPKA Turbo
Engine:
2.0L 4-cylinder CPKA Turbo [aka 2.0L L4 (Gas)]
Body & Trims:
Base, GSR, R-Line
Oil Capacity:
4.5 quarts (with filter)
Oil Viscosity/Type:
SAE 5W-30 (All TEMPS)
OEM Oil Filter:
Oil Filter Replaces:
06K-115-466, 06K-115-562, 06L-115-562, 06L-115-562-E
2014 Volkswagen Beetle 2.0L 4-cylinder CPKA Turbo oil change details
Oil Capacity:
4.5 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Air Filter:
Coolant Capacity:
5.9 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.0L 4-cylinder Engine Code CPRA Turbo
Engine:
2.0L 4-cylinder CPRA Turbo [aka 2.0L L4 (Gas)]
Body & Trims:
Base, GSR, R-Line
Oil Capacity:
5.8 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
06K-115-466, 06K-115-562, 06L-115-562, 06L-115-562-E
2014 Volkswagen Beetle 2.0L 4-cylinder CPRA Turbo oil change details
Oil Capacity:
5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Oil Filter:
Wix Air Filter:
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.0L 4-cylinder Engine Code CJAA Diesel Turbo
Engine:
2.0L 4-cylinder CJAA Diesel Turbo [aka 2.0L L4 (Gas)]
Body & Trims:
TDI
Oil Capacity:
5.8 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
071-115-562, 071-115-562-C
2014 Volkswagen Beetle 2.0L 4-cylinder CJAA Diesel Turbo oil change details
Oil Capacity:
5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Oil Filter:
Wix Air Filter:
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.5L 5-cylinder Engine Code CPLA Turbo
Engine:
2.5L 5-cylinder CPLA Turbo [aka 2.5L L5 (Gas)]
Body & Trims:
TDI
Oil Capacity:
6.3 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
071-115-562, 071-115-562-C
2014 Volkswagen Beetle 2.5L 5-cylinder CPLA Turbo oil change details
Oil Capacity:
6.3 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Coolant Capacity:
9.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
2.5L 5-cylinder Engine Code CPPA Turbo
Engine:
2.5L 5-cylinder CPPA Turbo [aka 2.5L L5 (Gas)]
Body & Trims:
TDI
Oil Capacity:
6.3 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
071-115-562, 071-115-562-C
2014 Volkswagen Beetle 2.5L 5-cylinder CPPA Turbo oil change details
Oil Capacity:
6.3 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Coolant Capacity:
9.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
People also ask – 2014 Volkswagen Beetle
What is the oil capacity of a 2014 Volkswagen Beetle?
Depending on the specific engine option, the 2014 Volkswagen Beetle oil capacity ranges from 4.5 to 6.3 quarts. Here is the exact oil capacity breakdown for each available engine configuration:
• 1.8L 4-cylinder (CJAA Diesel Turbo): 5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 1.8L 4-cylinder (CPLA Turbo): 5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.0L 4-cylinder (CPPA Turbo): 4.5 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.0L 4-cylinder (CBTA): 5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.0L 4-cylinder (CBUA): 5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.0L 4-cylinder (CPKA Turbo): 4.5 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.0L 4-cylinder (CPRA Turbo): 5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.0L 4-cylinder (CJAA Diesel Turbo): 5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.5L 5-cylinder (CPLA Turbo): 6.3 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.5L 5-cylinder (CPPA Turbo): 6.3 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Always check your dipstick after refilling to ensure the proper level.
What type of oil does a 2014 Volkswagen Beetle use?
Across its 10 available engine configurations, the 2014 Volkswagen Beetle uses the following motor oil viscosities: SAE 5W-40, SAE 5W-30 (All TEMPS) and SAE 5W-30 (All TEMPS). Using the correct manufacturer-approved oil weight is crucial for engine health. Here are the specific oil type requirements by engine:
• 1.8L 4-cylinder (CJAA Diesel Turbo):SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 1.8L 4-cylinder (CPLA Turbo):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.0L 4-cylinder (CPPA Turbo):
SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.0L 4-cylinder (CBTA):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.0L 4-cylinder (CBUA):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.0L 4-cylinder (CPKA Turbo):
SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.0L 4-cylinder (CPRA Turbo):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.0L 4-cylinder (CJAA Diesel Turbo):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.5L 5-cylinder (CPLA Turbo):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.5L 5-cylinder (CPPA Turbo):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
What is the best oil filter for the 2014 Volkswagen Beetle?
The proper oil filter depends on your exact engine code. The 2014 Volkswagen Beetle utilizes the following premium aftermarket Wix oil filters across its lineup: WL10396-EA. Here is the specific OEM and aftermarket filter data for each engine:
• 1.8L 4-cylinder (CJAA Diesel Turbo):OEM Filter: Volkswagen 06L-115-562-B or Volkswagen 06J-115-403-Q
Wix Filter: WL10396-EA
• 1.8L 4-cylinder (CPLA Turbo):
OEM Filter: Volkswagen 06L-115-562-B or Volkswagen 06J-115-403-Q
Wix Filter: WL10396-EA
• 2.0L 4-cylinder (CPPA Turbo):
OEM Filter: Volkswagen 06L-115-562-B or Volkswagen 06J-115-403-Q
Wix Filter: Check Cross-reference Catalog
• 2.0L 4-cylinder (CBTA):
OEM Filter: Volkswagen 06D-115-562
Wix Filter: WL10396-EA
• 2.0L 4-cylinder (CBUA):
OEM Filter: Volkswagen 06D-115-562
Wix Filter: WL10396-EA
• 2.0L 4-cylinder (CPKA Turbo):
OEM Filter: Volkswagen 06L-115-562-B
Wix Filter: Check Cross-reference Catalog
• 2.0L 4-cylinder (CPRA Turbo):
OEM Filter: Volkswagen 06L-115-562-B
Wix Filter: WL10396-EA
• 2.0L 4-cylinder (CJAA Diesel Turbo):
OEM Filter: Volkswagen 071-115-562-A
Wix Filter: WL10396-EA
• 2.5L 5-cylinder (CPLA Turbo):
OEM Filter: Volkswagen 071-115-562-A
Wix Filter: Check Cross-reference Catalog
• 2.5L 5-cylinder (CPPA Turbo):
OEM Filter: Volkswagen 071-115-562-A
Wix Filter: Check Cross-reference Catalog
How often should I change the oil in my 2014 Volkswagen Beetle?
For modern models running full synthetic oil, oil change intervals are typically every 7,500 to 10,000 miles. However, for older Volkswagen Beetle generations (1985-2010) or those using conventional/synthetic-blend fluid, changing the oil and filter every 3,000 to 5,000 miles is highly recommended to prevent sludge buildup. Regardless of engine (1.8L 4-cylinder, 2.0L 4-cylinder and 2.5L 5-cylinder), you should change your oil at least once a year even if you don’t reach the mileage limit.