2008 Volkswagen GLI Oil Capacity, Types, & Filters
Your ultimate DIY maintenance guide for the 2008 Volkswagen GLI oil change is here! No more searching – find all the critical oil specs for your 2008 Volkswagen GLI, including exact engine oil capacity, the manufacturer recommended oil viscosity and type, and the correct OEM and aftermarket oil filters.
We cover all available engine options categorized by their specific engine codes, ensuring you get pinpoint accuracy for your specific vehicle configuration. Keep reading to discover everything required for a successful 2008 Volkswagen GLI oil change!
Scroll Table ➜
| Engine & Code | Oil Capacity | Oil Viscosity/Type |
|---|---|---|
| 2.0L 4-cylinder BPY Turbo | 4.9 quarts (with filter) | SAE 5W-40, SAE 5W-30 (All TEMPS) |
| 2.0L 4-cylinder CBFA Turbo | 4.9 quarts (with filter) | SAE 5W-40, SAE 5W-30 (All TEMPS) |
| 2.0L 4-cylinder CCTA Turbo | 4.9 quarts (with filter) | SAE 5W-40, SAE 5W-30 (All TEMPS) |
As an Amazon Associate I earn from qualifying purchases.
Recommended Air Filter
Select Your 2008 Volkswagen GLI Engine Option
2008 Volkswagen GLI 2.0L 4-cylinder BPY Turbo oil change details
Oil Capacity:
4.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Air Filter:
Coolant Capacity:
8.5 quarts
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug). After each time you remove the drain plug, you must replace it with a new one.
2008 Volkswagen GLI 2.0L 4-cylinder CBFA Turbo oil change details
Oil Capacity:
4.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Air Filter:
Coolant Capacity:
8.5 quarts
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug). After each time you remove the drain plug, you must replace it with a new one.
2008 Volkswagen GLI 2.0L 4-cylinder CCTA Turbo oil change details
Oil Capacity:
4.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Wix Air Filter:
Coolant Capacity:
8.5 quarts
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug). After each time you remove the drain plug, you must replace it with a new one.
People also ask – 2008 Volkswagen GLI
What is the oil capacity of a 2008 Volkswagen GLI?
The 2008 Volkswagen GLI oil capacity is 4.9 quarts. Here is the exact oil capacity breakdown for each available engine configuration:
• 2.0L 4-cylinder (BPY Turbo): 4.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.0L 4-cylinder (CBFA Turbo): 4.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
• 2.0L 4-cylinder (CCTA Turbo): 4.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Always check your dipstick after refilling to ensure the proper level.
What type of oil does a 2008 Volkswagen GLI use?
Across its 3 available engine configurations, the 2008 Volkswagen GLI uses the following motor oil viscosities: SAE 5W-40, SAE 5W-30 (All TEMPS). Using the correct manufacturer-approved oil weight is crucial for engine health. Here are the specific oil type requirements by engine:
• 2.0L 4-cylinder (BPY Turbo):SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.0L 4-cylinder (CBFA Turbo):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
• 2.0L 4-cylinder (CCTA Turbo):
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
What is the best oil filter for the 2008 Volkswagen GLI?
The proper oil filter depends on your exact engine code. Here is the specific OEM and aftermarket filter data for each engine:
• 2.0L 4-cylinder (BPY Turbo):OEM Filter: Check Dealer Part or Owner's Manual
Wix Filter: Check Cross-reference Catalog
• 2.0L 4-cylinder (CBFA Turbo):
OEM Filter: Check Dealer Part or Owner's Manual
Wix Filter: Check Cross-reference Catalog
• 2.0L 4-cylinder (CCTA Turbo):
OEM Filter: Check Dealer Part or Owner's Manual
Wix Filter: Check Cross-reference Catalog
How often should I change the oil in my 2008 Volkswagen GLI?
For modern models running full synthetic oil, oil change intervals are typically every 7,500 to 10,000 miles. However, for older Volkswagen GLI generations (1985-2010) or those using conventional/synthetic-blend fluid, changing the oil and filter every 3,000 to 5,000 miles is highly recommended to prevent sludge buildup. Regardless of engine (2.0L 4-cylinder), you should change your oil at least once a year even if you don’t reach the mileage limit.