1997 Audi A6 QUATTRO Oil Capacity, Types, & Filters
Your essential guide to 1997 Audi A6 QUATTRO oil change is here! No more searching – find all the critical oil specs for your 1997 Audi A6 QUATTRO, including oil capacity, recommended oil viscosity (type), and the correct oil filter.
We cover all engine options, categorized by their specific engine codes, ensuring you get the right information for your specific configuration. Keep reading to discover everything you need for your next 1997 Audi A6 QUATTRO oil change!
Scroll Table ➜
| Engine & Code | Oil Capacity | Oil Viscosity/Type | Oil Filter |
|---|---|---|---|
| 2.8L 6-cylinder [A] AFC 0 | N/A | N/A | Audi 078-115-561-J |
| 2.8L 6-cylinder [C] AFC X | 5.3 quarts (with filter) | SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C) SAE 5W-40, SAE 5W-30, SAE 10W-30, SAE 10W-40 (All TEMPS) 5W-50, SAE 10W-50, SAE 10W-60 (All TEMPS) | Audi 078-115-561-J |
Select Your 1997 Audi A6 QUATTRO Engine Option
2.8L 6-cylinder Engine Code [A] AFC 0
Engine:
2.8L 6-cylinder [A] AFC 0 [aka 2.8L V6 (Gas)]
Body & Trims:
Avant, Base
Oil Capacity:
N/A
Oil Viscosity/Type:
N/A
OEM Oil Filter:
Oil Filter Replaces:
078-115-561-D, 078-115-561-H
1997 Audi A6 QUATTRO 2.8L 6-cylinder [A] AFC 0 oil change details
Oil Grade:
N/A
Oil Capacity:
N/A
Oil Viscosity/Type:
N/A
Name of Oil Filter:
N/A
Wix Oil Filter:
N/A
Wix Air Filter:
N/A
Coolant Capacity:
8.5 quarts
Oil Drain Plug Torque:
N/A
Notes:
N/A
2.8L 6-cylinder Engine Code [C] AFC X
Engine:
2.8L 6-cylinder [C] AFC X [aka 2.8L V6 (Gas)]
Body & Trims:
Avant, Base
Oil Capacity:
5.3 quarts (with filter)
Oil Viscosity/Type:
SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C)
SAE 5W-40, SAE 5W-30, SAE 10W-30, SAE 10W-40 (All TEMPS)
5W-50, SAE 10W-50, SAE 10W-60 (All TEMPS)
OEM Oil Filter:
Oil Filter Replaces:
078-115-561-D, 078-115-561-H
1997 Audi A6 QUATTRO 2.8L 6-cylinder [C] AFC X oil change details
Oil Grade:
SJ
Oil Capacity:
5.3 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C)
SAE 5W-40, SAE 5W-30, SAE 10W-30, SAE 10W-40 (All TEMPS) - Shown viscosity/temperature combinations are only valid if an energy-conserving oil is used.
5W-50, SAE 10W-50, SAE 10W-60 (All TEMPS)
Name of Oil Filter:
N/A
Wix Oil Filter:
N/A
Wix Air Filter:
N/A
Coolant Capacity:
8.5 quarts
Oil Drain Plug Torque:
30 ft/lbs (Oil Drain Plug)
Notes:
N/A