1993 Volkswagen Corrado Oil Capacity, Types, & Filters
Your essential guide to 1993 Volkswagen Corrado oil change is here! No more searching – find all the critical oil specs for your 1993 Volkswagen Corrado, including oil capacity, recommended oil viscosity (type), and the correct oil filter.
We cover all engine options, categorized by their specific engine codes, ensuring you get the right information for your specific configuration. Keep reading to discover everything you need for your next 1993 Volkswagen Corrado oil change!
Scroll Table ➜
| Engine & Code | Oil Capacity | Oil Viscosity/Type | Oil Filter |
|---|---|---|---|
| 2.8L 6-cylinder [D] AAA J | 5.8 quarts (with filter) | 10W (Below -5°C) SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C) SAE 20W-20 (-10 To 10°C) 30 (0 To 30°C) 40 (Above 20°C) SAE 5W-30, SAE 5W-40, SAE 10W-30, SAE 10W-40 (All TEMPS) 5W-50, SAE 10W-50, SAE 10W-60 (All TEMPS) | N/A |
| 2.8L 6-cylinder [D] [E][F] 5 | 5.8 quarts (with filter) | 10W (Below -5°C) SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C) SAE 20W-20 (-10 To 10°C) 30 (0 To 30°C) 40 (Above 20°C) SAE 5W-30, SAE 5W-40, SAE 10W-30, SAE 10W-40 (All TEMPS) 5W-50, SAE 10W-50, SAE 10W-60 (All TEMPS) | N/A |
| 2.8L 6-cylinder [E] AAA K | 5.8 quarts (with filter) | 10W (Below -5°C) SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C) SAE 20W-20 (-10 To 10°C) 30 (0 To 30°C) 40 (Above 20°C) SAE 5W-30, SAE 5W-40, SAE 10W-30, SAE 10W-40 (All TEMPS) 5W-50, SAE 10W-50, SAE 10W-60 (All TEMPS) | N/A |
| 2.8L 6-cylinder [F] AAA L | 5.8 quarts (with filter) | 10W (Below -5°C) SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C) SAE 20W-20 (-10 To 10°C) 30 (0 To 30°C) 40 (Above 20°C) SAE 5W-30, SAE 5W-40, SAE 10W-30, SAE 10W-40 (All TEMPS) 5W-50, SAE 10W-50, SAE 10W-60 (All TEMPS) | N/A |
Select Your 1993 Volkswagen Corrado Engine Option
2.8L 6-cylinder Engine Code [D] AAA J
Engine:
2.8L 6-cylinder [D] AAA J [aka 2.8L 6-cylinder]
Body & Trims:
All
Oil Capacity:
5.8 quarts (with filter)
Oil Viscosity/Type:
10W (Below -5°C)
SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C)
SAE 20W-20 (-10 To 10°C)
30 (0 To 30°C)
40 (Above 20°C)
SAE 5W-30, SAE 5W-40, SAE 10W-30, SAE 10W-40 (All TEMPS)
5W-50, SAE 10W-50, SAE 10W-60 (All TEMPS)
OEM Oil Filter:
N/A
Oil Filter Replaces:
N/A
1993 Volkswagen Corrado 2.8L 6-cylinder [D] AAA J oil change details
Oil Grade:
SJ
Oil Capacity:
5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
10W (Below -5°C)
SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C)
SAE 20W-20 (-10 To 10°C)
30 (0 To 30°C)
40 (Above 20°C)
SAE 5W-30, SAE 5W-40, SAE 10W-30, SAE 10W-40 (All TEMPS) - This applies when using energy-conserving oils.
5W-50, SAE 10W-50, SAE 10W-60 (All TEMPS)
Name of Oil Filter:
N/A
Wix Oil Filter:
N/A
Wix Air Filter:
N/A
Coolant Capacity:
7 quarts
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
Notes:
N/A
2.8L 6-cylinder Engine Code [D] [E][F] 5
Engine:
2.8L 6-cylinder [D] [E][F] 5 [aka 2.8L 6-cylinder]
Body & Trims:
All
Oil Capacity:
5.8 quarts (with filter)
Oil Viscosity/Type:
10W (Below -5°C)
SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C)
SAE 20W-20 (-10 To 10°C)
30 (0 To 30°C)
40 (Above 20°C)
SAE 5W-30, SAE 5W-40, SAE 10W-30, SAE 10W-40 (All TEMPS)
5W-50, SAE 10W-50, SAE 10W-60 (All TEMPS)
OEM Oil Filter:
N/A
Oil Filter Replaces:
N/A
1993 Volkswagen Corrado 2.8L 6-cylinder [D] [E][F] 5 oil change details
Oil Grade:
SJ
Oil Capacity:
5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
10W (Below -5°C)
SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C)
SAE 20W-20 (-10 To 10°C)
30 (0 To 30°C)
40 (Above 20°C)
SAE 5W-30, SAE 5W-40, SAE 10W-30, SAE 10W-40 (All TEMPS) - This applies when using energy-conserving oils.
5W-50, SAE 10W-50, SAE 10W-60 (All TEMPS)
Name of Oil Filter:
N/A
Wix Oil Filter:
N/A
Wix Air Filter:
N/A
Coolant Capacity:
7 quarts
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
Notes:
N/A
2.8L 6-cylinder Engine Code [E] AAA K
Engine:
2.8L 6-cylinder [E] AAA K [aka 2.8L 6-cylinder]
Body & Trims:
All
Oil Capacity:
5.8 quarts (with filter)
Oil Viscosity/Type:
10W (Below -5°C)
SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C)
SAE 20W-20 (-10 To 10°C)
30 (0 To 30°C)
40 (Above 20°C)
SAE 5W-30, SAE 5W-40, SAE 10W-30, SAE 10W-40 (All TEMPS)
5W-50, SAE 10W-50, SAE 10W-60 (All TEMPS)
OEM Oil Filter:
N/A
Oil Filter Replaces:
N/A
1993 Volkswagen Corrado 2.8L 6-cylinder [E] AAA K oil change details
Oil Grade:
SJ
Oil Capacity:
5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
10W (Below -5°C)
SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C)
SAE 20W-20 (-10 To 10°C)
30 (0 To 30°C)
40 (Above 20°C)
SAE 5W-30, SAE 5W-40, SAE 10W-30, SAE 10W-40 (All TEMPS) - This applies when using energy-conserving oils.
5W-50, SAE 10W-50, SAE 10W-60 (All TEMPS)
Name of Oil Filter:
N/A
Wix Oil Filter:
N/A
Wix Air Filter:
N/A
Coolant Capacity:
7 quarts
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
Notes:
N/A
2.8L 6-cylinder Engine Code [F] AAA L
Engine:
2.8L 6-cylinder [F] AAA L [aka 2.8L 6-cylinder]
Body & Trims:
All
Oil Capacity:
5.8 quarts (with filter)
Oil Viscosity/Type:
10W (Below -5°C)
SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C)
SAE 20W-20 (-10 To 10°C)
30 (0 To 30°C)
40 (Above 20°C)
SAE 5W-30, SAE 5W-40, SAE 10W-30, SAE 10W-40 (All TEMPS)
5W-50, SAE 10W-50, SAE 10W-60 (All TEMPS)
OEM Oil Filter:
N/A
Oil Filter Replaces:
N/A
1993 Volkswagen Corrado 2.8L 6-cylinder [F] AAA L oil change details
Oil Grade:
SJ
Oil Capacity:
5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
10W (Below -5°C)
SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C)
SAE 20W-20 (-10 To 10°C)
30 (0 To 30°C)
40 (Above 20°C)
SAE 5W-30, SAE 5W-40, SAE 10W-30, SAE 10W-40 (All TEMPS) - This applies when using energy-conserving oils.
5W-50, SAE 10W-50, SAE 10W-60 (All TEMPS)
Name of Oil Filter:
N/A
Wix Oil Filter:
N/A
Wix Air Filter:
N/A
Coolant Capacity:
7 quarts
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug)
Notes:
N/A