2020 Ford F-150 Raptor Oil Capacity, Types, & Filters
Your ultimate DIY maintenance guide for the 2020 Ford F-150 Raptor oil change is here! No more searching – find all the critical oil specs for your 2020 Ford F-150 Raptor, including exact engine oil capacity, the manufacturer recommended oil viscosity and type, and the correct OEM and aftermarket oil filters.
We cover all available engine options categorized by their specific engine codes, ensuring you get pinpoint accuracy for your specific vehicle configuration. Keep reading to discover everything required for a successful 2020 Ford F-150 Raptor oil change!
Scroll Table ➜
| Engine & Code | Oil Capacity | Oil Viscosity/Type | Oil Filter |
|---|---|---|---|
| 3.5L 6-cylinder [G] I Turbo | 6 quarts (with filter) | SAE 5W-30 (Above -29°C) | N/A |
Select Your 2020 Ford F-150 Raptor Engine Option
3.5L 6-cylinder Engine Code [G] I Turbo
Engine:
3.5L 6-cylinder [G] I Turbo [aka 3.5L 6-cylinder (Turbo)]
Body & Trims:
All
Oil Capacity:
6 quarts (with filter)
Oil Viscosity/Type:
SAE 5W-30 (Above -29°C)
OEM Oil Filter:
N/A
Oil Filter Replaces:
N/A
2020 Ford F-150 Raptor 3.5L 6-cylinder [G] I Turbo oil change details
Oil Grade:
SEO89
Oil Capacity:
6 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Oil Drain Plug Torque:
N/A
Notes:
To improve your engine's ability to start in extreme climates where the ambient temperature is -30°C (-22°F) or below, use a 0W-30 oil that meets specification WSS-M2C953-B1.
People also ask – 2020 Ford F-150 Raptor
What is the oil capacity of a 2020 Ford F-150 Raptor?
Depending on the specific engine option, the 2020 Ford F-150 Raptor oil capacity ranges from 6 to 6 quarts. Here is the exact oil capacity breakdown for each available engine configuration:
• 3.5L 6-cylinder ([G] I Turbo): 6 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Always check your dipstick after refilling to ensure the proper level.
What type of oil does a 2020 Ford F-150 Raptor use?
Across its 1 available engine configurations, the 2020 Ford F-150 Raptor uses the following motor oil viscosities: SAE 5W-30 (Above -29°C). Using the correct manufacturer-approved oil weight is crucial for engine health. Here are the specific oil type requirements by engine:
• 3.5L 6-cylinder ([G] I Turbo):Grade: SEO89
SAE 5W-30 (Above -29°C) - For easier cold starts in extreme climates with ambient temperatures of -30°C (-22°F) or below, use SAE 0W-30 oil that meets specification WSS-M2C953-B1.
What is the best oil filter for the 2020 Ford F-150 Raptor?
The proper oil filter depends on your exact engine code. The 2020 Ford F-150 Raptor utilizes the following premium aftermarket Wix oil filters across its lineup: 57502-EA. Here is the specific OEM and aftermarket filter data for each engine:
• 3.5L 6-cylinder ([G] I Turbo):OEM Filter: Check Dealer Part or Owner's Manual
Wix Filter: 57502-EA
How often should I change the oil in my 2020 Ford F-150 Raptor?
For modern models running full synthetic oil, oil change intervals are typically every 7,500 to 10,000 miles. However, for older Ford F-150 Raptor generations (1985-2010) or those using conventional/synthetic-blend fluid, changing the oil and filter every 3,000 to 5,000 miles is highly recommended to prevent sludge buildup. Regardless of engine (3.5L 6-cylinder), you should change your oil at least once a year even if you don’t reach the mileage limit.