2020 Ford Explorer Oil Capacity, Types, & Filters
Your ultimate DIY maintenance guide for the 2020 Ford Explorer oil change is here! No more searching – find all the critical oil specs for your 2020 Ford Explorer, including exact engine oil capacity, the manufacturer recommended oil viscosity and type, and the correct OEM and aftermarket oil filters.
We cover all available engine options categorized by their specific engine codes, ensuring you get pinpoint accuracy for your specific vehicle configuration. Keep reading to discover everything required for a successful 2020 Ford Explorer oil change!
Scroll Table ➜
| Engine & Code | Oil Capacity | Oil Viscosity/Type | Oil Filter |
|---|---|---|---|
| 2.3L 4-cylinder 99C Turbo | 5.2 quarts (with filter) | SAE 5W-30 (Above -29°C) | Ford FL-2062-A |
| 3.0L 6-cylinder 99B Flex | 6 quarts (with filter) | SAE 5W-30 (Above -29°C) | Ford FL-500-S |
| 3.3L 6-cylinder 99W | 6 quarts (with filter) | SAE 5W-20 (Above -29°C) | Ford FL-500-S |
| 3.3L 6-cylinder 99H Turbo | 6 quarts (with filter) | SAE 5W-20 (Above -29°C) | Ford FL-910S |
Recommended Oil Filter
Recommended Air Filter
As an Amazon Associate I earn from qualifying purchases.
Select Your 2020 Ford Explorer Engine Option
2.3L 4-cylinder Engine Code 99C Turbo
Engine:
2.3L 4-cylinder 99C Turbo [aka 2.3L L4 (Gas)]
Body & Trims:
Platinum, ST
Oil Capacity:
5.2 quarts (with filter)
Oil Viscosity/Type:
SAE 5W-30 (Above -29°C)
OEM Oil Filter:
Oil Filter Replaces:
FT4Z-6731-A
2020 Ford Explorer 2.3L 4-cylinder 99C Turbo oil change details
Oil Capacity:
5.2 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Oil Drain Plug Torque:
20 ft/lbs (Oil Drain Plug)
3.0L 6-cylinder Engine Code 99B Flex
Engine:
3.0L 6-cylinder 99B Flex [aka 3.0L V6 (Gas)]
Body & Trims:
Base, Limited Hybrid
Oil Capacity:
6 quarts (with filter)
Oil Viscosity/Type:
SAE 5W-30 (Above -29°C)
OEM Oil Filter:
Oil Filter Replaces:
BU2Z-6731-A
2020 Ford Explorer 3.0L 6-cylinder 99B Flex oil change details
Oil Capacity:
6 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
3.3L 6-cylinder Engine Code 99W
Engine:
3.3L 6-cylinder 99W [aka 3.3L V6 (Electric/Gas/Flex)]
Body & Trims:
Base, Limited Hybrid
Oil Capacity:
6 quarts (with filter)
Oil Viscosity/Type:
SAE 5W-20 (Above -29°C)
OEM Oil Filter:
Oil Filter Replaces:
BU2Z-6731-A
2020 Ford Explorer 3.3L 6-cylinder 99W oil change details
Oil Capacity:
6 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Wix Oil Filter:
Coolant Capacity:
14.2 quarts
Oil Drain Plug Torque:
19 ft/lbs (Oil Drain Plug)
Notes:
If you are using E85 or M85 fuels, use AMSOIL of the appropriate viscosity and follow the Original Equipment Manufacturer (OEM) recommended drain interval. Extended oil drain intervals are only possible if you perform an oil analysis when using these types of fuels.
3.3L 6-cylinder Engine Code 99H Turbo
Engine:
3.3L 6-cylinder 99H Turbo [aka 3.3L V6 (Electric/Gas/Flex)]
Body & Trims:
Base, Limited, XLT
Oil Capacity:
6 quarts (with filter)
Oil Viscosity/Type:
SAE 5W-20 (Above -29°C)
OEM Oil Filter:
Oil Filter Replaces:
1S7Z-6731-DA, FL-793
2020 Ford Explorer 3.3L 6-cylinder 99H Turbo oil change details
Oil Capacity:
6 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Wix Oil Filter:
Coolant Capacity:
4.6 quarts - For the Low Temperature Cooling Circuit (LTCC) on Hybrid Electric (HYB ELE) Vehicles.
15.2 quarts - This capacity is for the Engine.
Oil Drain Plug Torque:
19 ft/lbs (Oil Drain Plug)
People also ask – 2020 Ford Explorer
What is the oil capacity of a 2020 Ford Explorer?
Depending on the specific engine option, the 2020 Ford Explorer oil capacity ranges from 5.2 to 6 quarts. Here is the exact oil capacity breakdown for each available engine configuration:
• 2.3L 4-cylinder (99C Turbo): 5.2 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
• 3.0L 6-cylinder (99B Flex): 6 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
• 3.3L 6-cylinder (99W): 6 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
• 3.3L 6-cylinder (99H Turbo): 6 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Always check your dipstick after refilling to ensure the proper level.
What type of oil does a 2020 Ford Explorer use?
Across its 4 available engine configurations, the 2020 Ford Explorer uses the following motor oil viscosities: SAE 5W-30 (Above -29°C) and SAE 5W-20 (Above -29°C). Using the correct manufacturer-approved oil weight is crucial for engine health. Here are the specific oil type requirements by engine:
• 2.3L 4-cylinder (99C Turbo):SAE 5W-30 (Above -29°C) - To improve starting in extreme cold climates where the ambient temperature is -30°C (-22°F) or below, use SAE 0W-30 oil meeting specification WSS-M2C963-A1.
• 3.0L 6-cylinder (99B Flex):
SAE 5W-30 (Above -29°C) - To improve starting in extreme cold climates where the ambient temperature is -30°C (-22°F) or below, use SAE 0W-30 oil meeting specification WSS-M2C963-A1.
• 3.3L 6-cylinder (99W):
SAE 5W-20 (Above -29°C) - To improve engine starting in extremely cold climates where the ambient temperature is -30°C (-22°F) or below, use SAE 0W-20 oil that meets specification WSS-M2C947-A.
• 3.3L 6-cylinder (99H Turbo):
SAE 5W-20 (Above -29°C) - To improve engine starting in extremely cold climates where the ambient temperature is -30°C (-22°F) or below, use SAE 0W-20 oil that meets specification WSS-M2C947-A.
What is the best oil filter for the 2020 Ford Explorer?
The proper oil filter depends on your exact engine code. The 2020 Ford Explorer utilizes the following premium aftermarket Wix oil filters across its lineup: 51348-EA, WL10050-EA and 57502-EA. Here is the specific OEM and aftermarket filter data for each engine:
• 2.3L 4-cylinder (99C Turbo):OEM Filter: Ford FL-2062-A
Wix Filter: 51348-EA
• 3.0L 6-cylinder (99B Flex):
OEM Filter: Ford FL-500-S
Wix Filter: WL10050-EA
• 3.3L 6-cylinder (99W):
OEM Filter: Ford FL-500-S
Wix Filter: 57502-EA
• 3.3L 6-cylinder (99H Turbo):
OEM Filter: Ford FL-910S
Wix Filter: 57502-EA
How often should I change the oil in my 2020 Ford Explorer?
For modern models running full synthetic oil, oil change intervals are typically every 7,500 to 10,000 miles. However, for older Ford Explorer generations (1985-2010) or those using conventional/synthetic-blend fluid, changing the oil and filter every 3,000 to 5,000 miles is highly recommended to prevent sludge buildup. Regardless of engine (2.3L 4-cylinder, 3.0L 6-cylinder and 3.3L 6-cylinder), you should change your oil at least once a year even if you don’t reach the mileage limit.