2013 Volkswagen CC Oil Capacity, Types, & Filters
Your essential guide to 2013 Volkswagen CC oil change is here! No more searching – find all the critical oil specs for your 2013 Volkswagen CC, including oil capacity, recommended oil viscosity (type), and the correct oil filter.
We cover all engine options, categorized by their specific engine codes, ensuring you get the right information for your specific configuration. Keep reading to discover everything you need for your next 2013 Volkswagen CC oil change!
Scroll Table ➜
| Engine & Code | Oil Capacity | Oil Viscosity/Type | Oil Filter |
|---|---|---|---|
| 2.0L 4-cylinder CNNA 3 | 4.9 quarts (with filter) | SAE 5W-40, SAE 5W-30 (All TEMPS) | Volkswagen 03H-115-562 Volkswagen 070-115-562 |
| 2.0L 4-cylinder CBFA 2 Turbo | 4.9 quarts (with filter) | SAE 5W-40, SAE 5W-30 (All TEMPS) | Volkswagen 06J-115-403-Q |
| 3.6L 6-cylinder CCTA J Turbo | 5.8 quarts (with filter) | SAE 5W-40, SAE 5W-30 (All TEMPS) | Volkswagen 06J-115-403-Q |
Select Your 2013 Volkswagen CC Engine Option
2.0L 4-cylinder Engine Code CNNA 3
Engine:
2.0L 4-cylinder CNNA 3 [aka 2.0L L4 (Gas)]
Body & Trims:
Lux, VR6 4Motion Executive
Oil Capacity:
4.9 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
N/A
2013 Volkswagen CC 2.0L 4-cylinder CNNA 3 oil change details
Oil Grade:
SEO76
Oil Capacity:
4.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Name of Oil Filter:
N/A
Wix Oil Filter:
N/A
Wix Air Filter:
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug). After each time you remove the drain plug, you must replace it with a new one.
Notes:
N/A
2.0L 4-cylinder Engine Code CBFA 2 Turbo
Engine:
2.0L 4-cylinder CBFA 2 Turbo [aka 2.0L L4 (Gas)]
Body & Trims:
Lux, R-Line, Sport, Sport Plus
Oil Capacity:
4.9 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
06J-115-403-C, 06J-115-403-J, 06J-115-403-M
2013 Volkswagen CC 2.0L 4-cylinder CBFA 2 Turbo oil change details
Oil Grade:
SEO76
Oil Capacity:
4.9 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Name of Oil Filter:
N/A
Wix Oil Filter:
N/A
Wix Air Filter:
Coolant Capacity:
8.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug). After each time you remove the drain plug, you must replace it with a new one.
Notes:
N/A
3.6L 6-cylinder Engine Code CCTA J Turbo
Engine:
3.6L 6-cylinder CCTA J Turbo [aka 3.6L V6 (Gas)]
Body & Trims:
Lux, R-Line, Sport, Sport Plus
Oil Capacity:
5.8 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
06J-115-403-C, 06J-115-403-J, 06J-115-403-M
2013 Volkswagen CC 3.6L 6-cylinder CCTA J Turbo oil change details
Oil Grade:
SEO78
Oil Capacity:
5.8 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 5W-40, SAE 5W-30 (All TEMPS) - If a synthetic oil meeting the applicable Audi or Volkswagen quality standard with the recommended viscosity grade is unavailable, be sure to use a viscosity grade suitable for your climate, season, and driving conditions. Ensure the oil meets the listed Audi and Volkswagen oil quality standards.
Name of Oil Filter:
N/A
Wix Oil Filter:
Wix Air Filter:
N/A
Coolant Capacity:
9.5 quarts - The quantity of coolant can vary depending upon the vehicle equipment.
Oil Drain Plug Torque:
22 ft/lbs (Oil Drain Plug). After each time you remove the drain plug, you must replace it with a new one.
Notes:
N/A