2013 Chrysler Town and Country Oil Capacity, Types, & Filters
Your ultimate DIY maintenance guide for the 2013 Chrysler Town and Country oil change is here! No more searching – find all the critical oil specs for your 2013 Chrysler Town and Country, including exact engine oil capacity, the manufacturer recommended oil viscosity and type, and the correct OEM and aftermarket oil filters.
We cover all available engine options categorized by their specific engine codes, ensuring you get pinpoint accuracy for your specific vehicle configuration. Keep reading to discover everything required for a successful 2013 Chrysler Town and Country oil change!
Scroll Table ➜
| Engine & Code | Oil Capacity | Oil Viscosity/Type | Oil Filter |
|---|---|---|---|
| 3.6L 6-cylinder [G] ERB E | 5.9 quarts (with filter) | SAE 5W-20 (All TEMPS) | Mopar 68079744AD |
| 3.6L 6-cylinder [G] ERB G Flex | 5.9 quarts (with filter) | SAE 5W-20 (All TEMPS) | Mopar 68079744AD |
Select Your 2013 Chrysler Town and Country Engine Option
3.6L 6-cylinder Engine Code [G] ERB E
Engine:
3.6L 6-cylinder [G] ERB E [aka 3.6L V6 (Gas/Flex)]
Body & Trims:
Limited, S, Touring, Touring L
Oil Capacity:
5.9 quarts (with filter)
Oil Viscosity/Type:
SAE 5W-20 (All TEMPS)
OEM Oil Filter:
Oil Filter Replaces:
68079744AA, 68079744AB, 68079744AC
2013 Chrysler Town and Country 3.6L 6-cylinder [G] ERB E oil change details
Oil Grade:
SEO11
Oil Capacity:
5.9 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Oil Viscosity/Type:
SAE 5W-20 (All TEMPS)
Oil Drain Plug Torque:
20 ft/lbs (Oil Drain Plug)
Notes:
N/A
3.6L 6-cylinder Engine Code [G] ERB G Flex
Engine:
3.6L 6-cylinder [G] ERB G Flex [aka 3.6L V6 (Gas/Flex)]
Body & Trims:
Limited, S, Touring, Touring L
Oil Capacity:
5.9 quarts (with filter)
Oil Viscosity/Type:
SAE 5W-20 (All TEMPS)
OEM Oil Filter:
Oil Filter Replaces:
68079744AA, 68079744AB, 68079744AC
2013 Chrysler Town and Country 3.6L 6-cylinder [G] ERB G Flex oil change details
Oil Grade:
SEO11
Oil Capacity:
5.9 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Oil Viscosity/Type:
SAE 5W-20 (All TEMPS)
Oil Drain Plug Torque:
20 ft/lbs (Oil Drain Plug)
Notes:
If you are using E85 or M85 fuels, use AMSOIL of the appropriate viscosity and follow the Original Equipment Manufacturer (OEM) recommended drain interval. Extended oil drain intervals are only possible if you perform an oil analysis when using these types of fuels.
People also ask – 2013 Chrysler Town and Country
What is the oil capacity of a 2013 Chrysler Town and Country?
Depending on the specific engine option, the 2013 Chrysler Town and Country oil capacity ranges from 5.9 to 5.9 quarts. Here is the exact oil capacity breakdown for each available engine configuration:
• 3.6L 6-cylinder ([G] ERB E): 5.9 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
• 3.6L 6-cylinder ([G] ERB G Flex): 5.9 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Always check your dipstick after refilling to ensure the proper level.
What type of oil does a 2013 Chrysler Town and Country use?
Across its 2 available engine configurations, the 2013 Chrysler Town and Country uses the following motor oil viscosities: SAE 5W-20 (All TEMPS). Using the correct manufacturer-approved oil weight is crucial for engine health. Here are the specific oil type requirements by engine:
• 3.6L 6-cylinder ([G] ERB E):Grade: SEO11
SAE 5W-20 (All TEMPS)
• 3.6L 6-cylinder ([G] ERB G Flex):
Grade: SEO11
SAE 5W-20 (All TEMPS)
What is the best oil filter for the 2013 Chrysler Town and Country?
The proper oil filter depends on your exact engine code. The 2013 Chrysler Town and Country utilizes the following premium aftermarket Wix oil filters across its lineup: 57526-EA. Here is the specific OEM and aftermarket filter data for each engine:
• 3.6L 6-cylinder ([G] ERB E):OEM Filter: Mopar 68079744AD
Wix Filter: 57526-EA
• 3.6L 6-cylinder ([G] ERB G Flex):
OEM Filter: Mopar 68079744AD
Wix Filter: 57526-EA
How often should I change the oil in my 2013 Chrysler Town and Country?
For modern models running full synthetic oil, oil change intervals are typically every 7,500 to 10,000 miles. However, for older Chrysler Town and Country generations (1985-2010) or those using conventional/synthetic-blend fluid, changing the oil and filter every 3,000 to 5,000 miles is highly recommended to prevent sludge buildup. Regardless of engine (3.6L 6-cylinder), you should change your oil at least once a year even if you don’t reach the mileage limit.