2012 Ram 3500 PICKUP Oil Capacity, Types, & Filters
Your essential guide to 2012 Ram 3500 PICKUP oil change is here! No more searching – find all the critical oil specs for your 2012 Ram 3500 PICKUP, including oil capacity, recommended oil viscosity (type), and the correct oil filter.
We cover all engine options, categorized by their specific engine codes, ensuring you get the right information for your specific configuration. Keep reading to discover everything you need for your next 2012 Ram 3500 PICKUP oil change!
Scroll Table ➜
| Engine & Code | Oil Capacity | Oil Viscosity/Type | Oil Filter |
|---|---|---|---|
| 5.7L 8-cylinder [T] EZC T | 7 quarts (with filter) | SAE 5W-20 (All TEMPS) SAE 5W-30 (All TEMPS) | Mopar 4884899AC |
| 6.7L 6-cylinder [L] ETJ L Diesel Turbo | 12 quarts (with filter) | SAE 15W-40 (Above -18°C) SAE 5W-40 (Below -18°C) | Mopar 5083285AA |
Select Your 2012 Ram 3500 PICKUP Engine Option
5.7L 8-cylinder Engine Code [T] EZC T
Engine:
5.7L 8-cylinder [T] EZC T [aka 5.7L V8 (Gas)]
Body & Trims:
Laramie, SLT, ST
Oil Capacity:
7 quarts (with filter)
OEM Oil Filter:
Oil Filter Replaces:
4884899AB
2012 Ram 3500 PICKUP 5.7L 8-cylinder [T] EZC T oil change details
Oil Grade:
SEO11
Oil Capacity:
7 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Oil Drain Plug Torque:
25 ft/lbs (Oil Drain Plug)
Notes:
N/A
6.7L 6-cylinder Engine Code [L] ETJ L Diesel Turbo
Engine:
6.7L 6-cylinder [L] ETJ L Diesel Turbo [aka 6.7L L6 (Diesel)]
Body & Trims:
Laramie, Laramie Longhorn, SLT, ST
Oil Capacity:
12 quarts (with filter)
Oil Viscosity/Type:
SAE 15W-40 (Above -18°C)
SAE 5W-40 (Below -18°C)
OEM Oil Filter:
Oil Filter Replaces:
5016547AA, 5016547AB, 5016547AC, 68086920AA
2012 Ram 3500 PICKUP 6.7L 6-cylinder [L] ETJ L Diesel Turbo oil change details
Oil Grade:
SEO39
Oil Capacity:
12 quarts. (with filter). This is the capacity with the filter. When changing the oil, start and run the engine to operating temperature. Stop the engine and wait approximately 30 minutes for the oil to drain back to the pan. Check the oil level again and add more oil if needed.
Oil Viscosity/Type:
SAE 15W-40 (Above -18°C)
SAE 5W-40 (Below -18°C) - Please be aware: Failure to use SAE 5W-40 synthetic engine oil in ambient temperatures below -18°C (0°F) could result in severe engine damage.
Oil Drain Plug Torque:
37 ft/lbs (Oil Drain Plug)
Notes:
Use an American Petroleum Institute (API) CJ/CK-4 oil that meets the MS-10902 specification standard. Oil that meets the Cummins Engineering Standard (CES) 20081 may also be used. A low-ash diesel engine oil is required.