2011 Ram 2500 PICKUP Oil Capacity, Types, & Filters
Your essential guide to 2011 Ram 2500 PICKUP oil change is here! No more searching – find all the critical oil specs for your 2011 Ram 2500 PICKUP, including oil capacity, recommended oil viscosity (type), and the correct oil filter.
We cover all engine options, categorized by their specific engine codes, ensuring you get the right information for your specific configuration. Keep reading to discover everything you need for your next 2011 Ram 2500 PICKUP oil change!
Scroll Table ➜
| Engine & Code | Oil Capacity | Oil Viscosity/Type | Oil Filter |
|---|---|---|---|
| 5.7L 8-cylinder [L] ETJ L Diesel Turbo | 7 quarts (with filter) | SAE 5W-20 (All TEMPS) | Mopar 5083285AA Mopar 68218940AD |
| 6.7L 6-cylinder [T] EZC T | 12 quarts (with filter) | SAE 15W-40 (Above -18°C) SAE 5W-40 (Below -18°C) | Mopar 4884899AC |
Select Your 2011 Ram 2500 PICKUP Engine Option
5.7L 8-cylinder Engine Code [L] ETJ L Diesel Turbo
Engine:
5.7L 8-cylinder [L] ETJ L Diesel Turbo [aka 5.7L V8 (Gas)]
Body & Trims:
Laramie, Laramie Longhorn, SLT, ST
Oil Capacity:
7 quarts (with filter)
Oil Viscosity/Type:
SAE 5W-20 (All TEMPS)
OEM Oil Filter:
Oil Filter Replaces:
5016547AA, 5016547AB, 5016547AC, 68086920AA and 4798231AE, 4798231AF, 68024966AA, 68024966AB, 68024966MA, 68218940AA, 68218940AB, 68218940AC
2011 Ram 2500 PICKUP 5.7L 8-cylinder [L] ETJ L Diesel Turbo oil change details
Oil Grade:
SEO11
Oil Capacity:
7 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Oil Viscosity/Type:
SAE 5W-20 (All TEMPS)
Oil Drain Plug Torque:
25 ft/lbs (Oil Drain Plug)
Notes:
N/A
6.7L 6-cylinder Engine Code [T] EZC T
Engine:
6.7L 6-cylinder [T] EZC T [aka 6.7L L6 (Diesel)]
Body & Trims:
Laramie, Laramie Longhorn, Power Wagon, SLT, ST
Oil Capacity:
12 quarts (with filter)
Oil Viscosity/Type:
SAE 15W-40 (Above -18°C)
SAE 5W-40 (Below -18°C)
OEM Oil Filter:
Oil Filter Replaces:
4884899AB
2011 Ram 2500 PICKUP 6.7L 6-cylinder [T] EZC T oil change details
Oil Grade:
SEO39
Oil Capacity:
12 quarts. (with filter). This is the capacity with the filter. When changing the oil, start and run the engine to operating temperature. Stop the engine and wait approximately 30 minutes for the oil to drain back to the pan. Check the oil level again and add more oil if needed.
Oil Viscosity/Type:
SAE 15W-40 (Above -18°C)
SAE 5W-40 (Below -18°C) - Please be aware: Failure to use SAE 5W-40 synthetic engine oil in ambient temperatures below -18°C (0°F) could result in severe engine damage.
Oil Drain Plug Torque:
37 ft/lbs (Oil Drain Plug)
Notes:
Use an American Petroleum Institute (API) CJ/CK-4 oil that meets the MS-10902 specification standard. Oil that meets the Cummins Engineering Standard (CES) 20081 may also be used. A low-ash diesel engine oil is required.