2010 Am General HUMMER H3T Oil Capacity, Types, & Filters
Your essential guide to 2010 Am General HUMMER H3T oil change is here! No more searching – find all the critical oil specs for your 2010 Am General HUMMER H3T, including oil capacity, recommended oil viscosity (type), and the correct oil filter.
We cover all engine options, categorized by their specific engine codes, ensuring you get the right information for your specific configuration. Keep reading to discover everything you need for your next 2010 Am General HUMMER H3T oil change!
Scroll Table ➜
| Engine & Code | Oil Capacity | Oil Viscosity/Type | Oil Filter |
|---|---|---|---|
| 3.7L 5-cylinder [E] LLR E | 6 quarts (with filter) | SAE 0W-30 (Below -29°C) SAE 5W-30 (All TEMPS) | N/A |
| 5.3L 8-cylinder [P] LH9 1 | N/A | N/A | N/A |
| 5.3L 8-cylinder [P] LH9 P Flex | 6 quarts (with filter) | SAE 0W-30 (Below -29°C) SAE 5W-30 (All TEMPS) | N/A |
Select Your 2010 Am General HUMMER H3T Engine Option
2010 Am General HUMMER H3T 3.7L 5-cylinder [E] LLR E oil change details
Oil Grade:
SEO23
Oil Capacity:
6 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Oil Viscosity/Type:
SAE 0W-30 (Below -29°C) - If you are in an area of extreme cold where the temperature falls below the specified range, use SAE 5W-30 synthetic or SAE 0W-30 oil that meets Original Equipment Manufacturer specifications. These oils provide easier engine starting at extremely low temperatures.
SAE 5W-30 (All TEMPS)
Oil Drain Plug Torque:
19 ft/lbs (Oil Drain Plug)
Notes:
N/A
5.3L 8-cylinder Engine Code [P] LH9 1
Engine:
5.3L 8-cylinder [P] LH9 1 [aka 5.3L 8-cylinder]
Body & Trims:
All
Oil Capacity:
N/A
Oil Viscosity/Type:
N/A
OEM Oil Filter:
N/A
Oil Filter Replaces:
N/A
2010 Am General HUMMER H3T 5.3L 8-cylinder [P] LH9 1 oil change details
Oil Grade:
N/A
Oil Capacity:
N/A
Oil Viscosity/Type:
N/A
Name of Oil Filter:
N/A
Wix Oil Filter:
N/A
Wix Air Filter:
N/A
Coolant Capacity:
14.3 quarts
Oil Drain Plug Torque:
N/A
Notes:
N/A
2010 Am General HUMMER H3T 5.3L 8-cylinder [P] LH9 P Flex oil change details
Oil Grade:
SEO23
Oil Capacity:
6 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Oil Viscosity/Type:
SAE 0W-30 (Below -29°C) - If you are in an area of extreme cold where the temperature falls below the specified range, use SAE 5W-30 synthetic or SAE 0W-30 oil that meets Original Equipment Manufacturer specifications. These oils provide easier engine starting at extremely low temperatures.
SAE 5W-30 (All TEMPS)
Oil Drain Plug Torque:
18 ft/lbs (Oil Drain Plug)
Notes:
If you are using E85 or M85 fuels, use AMSOIL of the appropriate viscosity and follow the Original Equipment Manufacturer (OEM) recommended drain interval. Extended oil drain intervals are only possible if you perform an oil analysis when using these types of fuels.