2008 Pontiac Montana SV6 Oil Capacity, Types, & Filters
Your essential guide to 2008 Pontiac Montana SV6 oil change is here! No more searching – find all the critical oil specs for your 2008 Pontiac Montana SV6, including oil capacity, recommended oil viscosity (type), and the correct oil filter.
We cover all engine options, categorized by their specific engine codes, ensuring you get the right information for your specific configuration. Keep reading to discover everything you need for your next 2008 Pontiac Montana SV6 oil change!
Scroll Table ➜
| Engine & Code | Oil Capacity | Oil Viscosity/Type | Oil Filter |
|---|---|---|---|
| 3.9L 6-cylinder [1] A | 4 quarts (with filter) | SAE 0W-30 (Below -29°C) SAE 5W-30 (All TEMPS) | N/A |
| 3.9L 6-cylinder [W] W Flex | 4 quarts (with filter) | SAE 0W-30 (Below -29°C) SAE 5W-30 (All TEMPS) | N/A |
Select Your 2008 Pontiac Montana SV6 Engine Option
2008 Pontiac Montana SV6 3.9L 6-cylinder [1] A oil change details
Oil Grade:
SEO23
Oil Capacity:
4 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Name of Oil Filter:
N/A
Wix Oil Filter:
N/A
Wix Air Filter:
N/A
Coolant Capacity:
12.3 quarts - For models with rear Air Conditioning (AC).
10.8 quarts - For models WithOut rear Air Conditioning (AC).
Oil Drain Plug Torque:
18 ft/lbs (Oil Drain Plug)
Notes:
N/A
2008 Pontiac Montana SV6 3.9L 6-cylinder [W] W Flex oil change details
Oil Grade:
SEO23
Oil Capacity:
4 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.
Name of Oil Filter:
N/A
Wix Oil Filter:
N/A
Wix Air Filter:
N/A
Coolant Capacity:
12.3 quarts - For models with rear Air Conditioning (AC).
10.8 quarts - For models WithOut rear Air Conditioning (AC).
Oil Drain Plug Torque:
18 ft/lbs (Oil Drain Plug)
Notes:
If you are using E85 or M85 fuels, use AMSOIL of the appropriate viscosity and follow the Original Equipment Manufacturer (OEM) recommended drain interval. Extended oil drain intervals are only possible if you perform an oil analysis when using these types of fuels.