1995 Audi 90 Oil Capacity, Types, & Filters
Your essential guide to 1995 Audi 90 oil change is here! No more searching – find all the critical oil specs for your 1995 Audi 90, including oil capacity, recommended oil viscosity (type), and the correct oil filter.
We cover all engine options, categorized by their specific engine codes, ensuring you get the right information for your specific configuration. Keep reading to discover everything you need for your next 1995 Audi 90 oil change!
Scroll Table ➜
| Engine & Code | Oil Capacity | Oil Viscosity/Type | Oil Filter |
|---|---|---|---|
| 2.8L 6-cylinder [A] AAH X | 5.3 quarts (with filter) | SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C) SAE 5W-40, SAE 5W-30, SAE 10W-30, SAE 10W-40 (All TEMPS) | Audi 056-115-561-G Audi 06A-115-561-B Audi 078-115-561-J |
| 2.8L 6-cylinder [K] AAH 1 | 5.3 quarts (with filter) | SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C) SAE 5W-40, SAE 5W-30, SAE 10W-30, SAE 10W-40 (All TEMPS) | Audi 056-115-561-G Audi 06A-115-561-B Audi 078-115-561-J |
Select Your 1995 Audi 90 Engine Option
2.8L 6-cylinder Engine Code [A] AAH X
Engine:
2.8L 6-cylinder [A] AAH X [aka 2.8L V6 (Gas)]
Body & Trims:
Base, Sport
Oil Capacity:
5.3 quarts (with filter)
Oil Viscosity/Type:
SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C)
SAE 5W-40, SAE 5W-30, SAE 10W-30, SAE 10W-40 (All TEMPS)
OEM Oil Filter:
Audi 056-115-561-G, Audi 06A-115-561-B and Audi 078-115-561-J
Oil Filter Replaces:
034-115-561-A, 06A-115-561 and 078-115-561-D, 078-115-561-H
1995 Audi 90 2.8L 6-cylinder [A] AAH X oil change details
Oil Grade:
SJ
Oil Capacity:
5.3 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C)
SAE 5W-40, SAE 5W-30, SAE 10W-30, SAE 10W-40 (All TEMPS) - This applies when using energy-conserving oils.
Name of Oil Filter:
N/A
Wix Oil Filter:
N/A
Wix Air Filter:
N/A
Coolant Capacity:
11.6 quarts
Oil Drain Plug Torque:
30 ft/lbs (Oil Drain Plug)
Notes:
N/A
2.8L 6-cylinder Engine Code [K] AAH 1
Engine:
2.8L 6-cylinder [K] AAH 1 [aka 2.8L V6 (Gas)]
Body & Trims:
Base, Sport
Oil Capacity:
5.3 quarts (with filter)
Oil Viscosity/Type:
SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C)
SAE 5W-40, SAE 5W-30, SAE 10W-30, SAE 10W-40 (All TEMPS)
OEM Oil Filter:
Audi 056-115-561-G, Audi 06A-115-561-B and Audi 078-115-561-J
Oil Filter Replaces:
034-115-561-A, 06A-115-561 and 078-115-561-D, 078-115-561-H
1995 Audi 90 2.8L 6-cylinder [K] AAH 1 oil change details
Oil Grade:
SJ
Oil Capacity:
5.3 quarts. (with filter). Capacity is with the filter installed. Add 0.5 Liters (0.5 quarts) less than the total capacity shown. Start the engine and let it run until it reaches approximately 60°C (140°F). Then, switch the engine off, wait 3 minutes, and check the dipstick. Add oil to reach the full mark. The final amount needed may be more or less than 0.5 Liters (0.5 quarts).
Oil Viscosity/Type:
SAE 15W-40, SAE 15W-50, SAE 20W-40, SAE 20W-50 (Above -15°C)
SAE 5W-40, SAE 5W-30, SAE 10W-30, SAE 10W-40 (All TEMPS) - This applies when using energy-conserving oils.
Name of Oil Filter:
N/A
Wix Oil Filter:
N/A
Wix Air Filter:
N/A
Coolant Capacity:
11.6 quarts
Oil Drain Plug Torque:
30 ft/lbs (Oil Drain Plug)
Notes:
N/A