2009 Ford E-350 Van Oil Capacity, Types, & Filters

Your essential guide to 2009 Ford E-350 Van oil change is here! No more searching – find all the critical oil specs for your 2009 Ford E-350 Van, including oil capacity, recommended oil viscosity (type), and the correct oil filter.

We cover all engine options, categorized by their specific engine codes, ensuring you get the right information for your specific configuration. Keep reading to discover everything you need for your next 2009 Ford E-350 Van oil change!

Scroll Table ➜

Engine & Code	Oil Capacity	Oil Viscosity/Type	Oil Filter
5.4L 8-cylinder [P] P Diesel Turbo	6 quarts (with filter)	SAE 5W-20 (All TEMPS)	Ford FL-2016
6.0L 8-cylinder [L] L Flex	15 quarts (with filter)	SAE 0W-30, SAE 0W-40 (Below 10°C) SAE 10W-30 (-18 to 10°C) SAE 15W-40 (Above -7°C) SAE 5W-40 (Above -29°C)	Ford FL-820-S
6.8L 10-cyl [S] S	6.9 quarts (with filter)	SAE 5W-20 (All TEMPS)	Ford FL-820-S

Select Your 2009 Ford E-350 Van Engine Option

5.4L 8-cylinder Engine Code [P] P Diesel Turbo

Engine:

5.4L 8-cylinder [P] P Diesel Turbo [aka 5.4L V8 (Flex)]

Body & Trims:

Base, XLT

Oil Capacity:

6 quarts (with filter)

Oil Viscosity/Type:

SAE 5W-20 (All TEMPS)

OEM Oil Filter:

Ford FL-2016

Oil Filter Replaces:

N/A

2009 Ford E-350 Van 5.4L 8-cylinder [P] P Diesel Turbo oil change details

Oil Grade:

SEO15

Oil Capacity:

6 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.

Oil Viscosity/Type:

SAE 5W-20 (All TEMPS)

Name of Oil Filter:

N/A

Wix Oil Filter:

51372-EA

Wix Air Filter:

46418-EA

Coolant Capacity:

28.7 quarts - For models WithOut an auxiliary rear (RR) heater.
30.7 quarts - For models with an auxiliary rear (RR) heater.

Oil Drain Plug Torque:

17 ft/lbs (Oil Drain Plug)

Notes:

If you are using E85 or M85 fuels, use AMSOIL of the appropriate viscosity and follow the Original Equipment Manufacturer (OEM) recommended drain interval. Extended oil drain intervals are only possible if you perform an oil analysis when using these types of fuels.

6.0L 8-cylinder Engine Code [L] L Flex

Engine:

6.0L 8-cylinder [L] L Flex [aka 6.0L V8 (Diesel)]

Body & Trims:

Base, XL, XLT

Oil Capacity:

15 quarts (with filter)

Oil Viscosity/Type:

SAE 0W-30, SAE 0W-40 (Below 10°C)
SAE 10W-30 (-18 to 10°C)
SAE 15W-40 (Above -7°C)
SAE 5W-40 (Above -29°C)

OEM Oil Filter:

Ford FL-820-S

Oil Filter Replaces:

F1AZ-6731-A

2009 Ford E-350 Van 6.0L 8-cylinder [L] L Flex oil change details

Oil Grade:

SEO84

Oil Capacity:

15 quarts. (with filter). This is the capacity with the oil filter installed. Always check the oil level after refilling.

Oil Viscosity/Type:

SAE 0W-30, SAE 0W-40 (Below 10°C)
SAE 10W-30 (-18 to 10°C)
SAE 15W-40 (Above -7°C) - For heavy-duty driving and trailer towing, you must use either SAE 5W-40 or SAE 15W-40.
SAE 5W-40 (Above -29°C) - For heavy-duty driving and trailer towing, you must use either SAE 5W-40 or SAE 15W-40.

Name of Oil Filter:

N/A

Wix Oil Filter:

N/A

Wix Air Filter:

N/A

Coolant Capacity:

27.5 quarts

Oil Drain Plug Torque:

32 ft/lbs (Oil Drain Plug)

Notes:

When the American Petroleum Institute (API) CK-4 standard was released in 2016, Ford replaced its original recommendation of WSS-M2C171-D with WSS-M2C171-F1. Ford Motor Company maintains its recommendation for motor oils meeting the specific Ford WSS-M2C171-F1 specification instead of generic CK-4 oils for its 3.2L, 6.7L, and older diesel engines (4.5L, 6.0L, 6.4L, and 7.3L). This is due to tests showing some CK-4 formulations offered less wear protection than the CJ-4 oils licensed before 2016. As a result, Ford added specific requirements to its WSS-M2C171-F1 standard for better wear protection. As a result, Ford added specific requirements to its WSS-M2C171-F1 standard for better wear protection. Following the practice of many Original Equipment Manufacturers (OEMs), Ford recommends using oils that meet its own standard, the Ford Material Engineering Specification WSS-M2C171-F1.