1996 Ford Bronco Oil Capacity, Types, & Filters
Your ultimate DIY maintenance guide for the 1996 Ford Bronco oil change is here! No more searching – find all the critical oil specs for your 1996 Ford Bronco, including exact engine oil capacity, the manufacturer recommended oil viscosity and type, and the correct OEM and aftermarket oil filters.
We cover all available engine options categorized by their specific engine codes, ensuring you get pinpoint accuracy for your specific vehicle configuration. Keep reading to discover everything required for a successful 1996 Ford Bronco oil change!
Scroll Table ➜
| Engine & Code | Oil Capacity | Oil Viscosity/Type | Oil Filter |
|---|---|---|---|
| 5.0L 8-cylinder [N] N | 6 quarts (with filter) | SAE 5W-20 (All TEMPS) | Ford FL-1-A |
| 5.8L 8-cylinder [H] H | 6 quarts (with filter) | SAE 5W-20 (All TEMPS) | Ford FL-820-S |
Select Your 1996 Ford Bronco Engine Option
5.0L 8-cylinder Engine Code [N] N
Engine:
5.0L 8-cylinder [N] N [aka 5.0L V8 (Gas)]
Body & Trims:
Eddie Bauer, XL, XLT, XLT Sport
Oil Capacity:
6 quarts (with filter)
Oil Viscosity/Type:
SAE 5W-20 (All TEMPS)
OEM Oil Filter:
Oil Filter Replaces:
E7TZ-6731-A
1996 Ford Bronco 5.0L 8-cylinder [N] N oil change details
Oil Grade:
SEO15
Oil Capacity:
6 quarts. (with filter). Capacity is with the filter installed. When refilling, remove the dipstick to provide proper venting and allow oil to flow into the crankcase smoothly. After refilling, check the oil level and add more if needed.
Name of Oil Filter:
N/A
Wix Oil Filter:
Wix Air Filter:
Coolant Capacity:
13.7 quarts - For models with an Automatic Transmission (AT) and WithOut Air Conditioning (AC).
13.7 quarts - For models with a Manual Transmission (MT) and Air Conditioning (AC).
13.2 quarts - For models with a Manual Transmission (MT) and WithOut Air Conditioning (AC).
14.8 quarts - For models with Supercooling.
Oil Drain Plug Torque:
15-25 ft/lbs (Oil Drain Plug)
Notes:
N/A
5.8L 8-cylinder Engine Code [H] H
Engine:
5.8L 8-cylinder [H] H [aka 5.8L V8 (Gas)]
Body & Trims:
Eddie Bauer, XL, XLT, XLT Sport
Oil Capacity:
6 quarts (with filter)
Oil Viscosity/Type:
SAE 5W-20 (All TEMPS)
OEM Oil Filter:
Oil Filter Replaces:
F1AZ-6731-A
1996 Ford Bronco 5.8L 8-cylinder [H] H oil change details
Oil Grade:
SEO15
Oil Capacity:
6 quarts. (with filter). Capacity is with the filter installed. When refilling, remove the dipstick to provide proper venting and allow oil to flow into the crankcase smoothly. After refilling, check the oil level and add more if needed.
Oil Drain Plug Torque:
15-25 ft/lbs (Oil Drain Plug)
Notes:
N/A
People also ask – 1996 Ford Bronco
What is the oil capacity of a 1996 Ford Bronco?
Depending on the specific engine option, the 1996 Ford Bronco oil capacity ranges from 6 to 6 quarts. Here is the exact oil capacity breakdown for each available engine configuration:
• 5.0L 8-cylinder ([N] N): 6 quarts. (with filter). Capacity is with the filter installed. When refilling, remove the dipstick to provide proper venting and allow oil to flow into the crankcase smoothly. After refilling, check the oil level and add more if needed.
• 5.8L 8-cylinder ([H] H): 6 quarts. (with filter). Capacity is with the filter installed. When refilling, remove the dipstick to provide proper venting and allow oil to flow into the crankcase smoothly. After refilling, check the oil level and add more if needed.
Always check your dipstick after refilling to ensure the proper level.
What type of oil does a 1996 Ford Bronco use?
Across its 2 available engine configurations, the 1996 Ford Bronco uses the following motor oil viscosities: SAE 5W-20 (All TEMPS). Using the correct manufacturer-approved oil weight is crucial for engine health. Here are the specific oil type requirements by engine:
• 5.0L 8-cylinder ([N] N):Grade: SEO15
SAE 5W-20 (All TEMPS) - This specification has been updated from SAE 5W-30 to SAE 5W-20 based on a Technical Service Bulletin from the manufacturer. SAE 5W-20 is now the preferred viscosity.
• 5.8L 8-cylinder ([H] H):
Grade: SEO15
SAE 5W-20 (All TEMPS) - This specification has been updated from SAE 5W-30 to SAE 5W-20 based on a Technical Service Bulletin from the manufacturer. SAE 5W-20 is now the preferred viscosity.
What is the best oil filter for the 1996 Ford Bronco?
The proper oil filter depends on your exact engine code. The 1996 Ford Bronco utilizes the following premium aftermarket Wix oil filters across its lineup: 51515-EA and 51372-EA. Here is the specific OEM and aftermarket filter data for each engine:
• 5.0L 8-cylinder ([N] N):OEM Filter: Ford FL-1-A
Wix Filter: 51515-EA
• 5.8L 8-cylinder ([H] H):
OEM Filter: Ford FL-820-S
Wix Filter: 51372-EA
How often should I change the oil in my 1996 Ford Bronco?
For modern models running full synthetic oil, oil change intervals are typically every 7,500 to 10,000 miles. However, for older Ford Bronco generations (1985-2010) or those using conventional/synthetic-blend fluid, changing the oil and filter every 3,000 to 5,000 miles is highly recommended to prevent sludge buildup. Regardless of engine (5.0L 8-cylinder and 5.8L 8-cylinder), you should change your oil at least once a year even if you don’t reach the mileage limit.